Robot Dialogs

Time for another post not about robots... Most projects are on the back burner because I've been poking about with an Ubuntu Server, Drupal and CiviCRM for CCCKC . I decided to make some coasters as a gift a family member. I went to Michaels to pick up the wood circle blanks, and Hobby Lobby had 4 inch cork coasters. I used one coat of stain before using the method I've described here to do the knot designs. This coat keeps the Sharpie ink from bleeding too much. When the designs were done I used 2 more coats of the stain and glued the wood disks to the cork coasters. Pictures taken with my EVO and the Droid Tripod Mount (yes it works with the EVO too!). I'm still on the fence about the Gorilla Glue. Hopefully it holds...I'm not sure I used enough. I tested one of them overnight with a puddle of water on the stained surface and it seemed to be sufficiently water proof.

I've been tinkering about with making panoramic pictures lately and when I'm out and about my Droid is the only camera I have. But taking panorama quality pictures with it is pretty tough. So last night I whipped together a very simple tripod mount. It's pretty self explanatory...here's what you need: Wood, I used 3/8" pine from the scrap pile. Small screws Wood glue Drill and bits (1/4" for standard tripod screw) Saw (I prefer the small teeth of a hack saw for little stuff like this.) Paint I had some in progress pics but Windows ate them. Essentially the only part I measured accurately was the slot the droid slides into, other than that it was just eyeballed. Two small screws hold the upright pieces (wood glue also). I used some paint I had from a robot project. Tripod screw threads right into the wood. I spent nothing upfront on this project...I'd estimate cost around $1 of material and maybe 30 minutes time went into it. It fits quite snu...